Best Cheap Tig Welder Reviews In 2023!

It is an undeniable fact that TIG or Tungsten Inert Gas welding outclassed other types of welding when it comes to the best cheap TIG welder, because it offers more command to users than any other type of welding method.

The whole process of best low cost TIG welder is somewhat quite different from other conventional type of welding, because in this type of welding, the tungsten electrode will heat the metal and the gas of the welding protecting it from airborne contaminants.

This type of welding produces more clean and neat welding on almost any kind of metal.

TOP 3 PICKS

AHP AlphaTIG 200X TIG Welder

  • Material: Stainless Steel
  • Power Source: AC/DC
  • Batteries Required: No

Miller Maxstar 150 STL TIG Welder

  • Frequency 50/60 Hz
  • Duty Cycle: 100A @ 35%
  • Warranty: 3 Years

Everlast PowerPro 256S TIG Welding Machine

  • Input Voltage: 240 Volt
  • Total weight: 65 lbs
  • Duty Cycle: 250Amp@60%

Advantages of TIG Welding Over Traditional Welding Methods:

Here, are some of the advantages of the best affordable TIG welder.

  1. Non-Consumable Electrode

One of the best and distinctive advantages of the TIG welding is that it uses non-consumable electrodes for welding.

The traditional type of welding as SMAW or stick type welding uses the consumable electrodes and welder has to stop his welding work in order to change the consummated electrode. This method significantly affects the overall welding process.

On the other hand, the best budget AC DC TIG welder uses the non-consumable electrode that allows the user to carry out undisturbed welding work that results in a flawless welding.

  1. Excellent for a Wide range of Metals and Alloys

It is a common misperception that all types of welding should work with almost any type of metal without any problems at all. This myth is totally wrong, because each welding has its limitation and hence it cannot be used to weld nearly all types of metals.

The best inexpensive and low budget TIG welder is considered as an excellent type of welding for a nearly complete range of metals and alloys, like coppers, magnesium, aluminum and even gold.

These types of metals are commonly used in houses and industries, so the best inexpensive TIG welder can easily weld such metals with ease.

  1. Best Budget TIG Welder Australia can Operate in Almost Any Position

This is by far most, the distinctive feature of the best cheap TIG welder AC DC that this welding allows to work in different positions.

All the users have the ability to weld metals in almost any direction as downward, upward, side and so on.

This option is available for every welding. But, if you are using the TIG welding, then you simply don’t have to worry about anything at all.

  1. Less Smoke and Fewer Fumes 

This is another distinctive feature of the MIG TIG welder is that it produces fewer fumes and less smoke than any other type of traditional welding.

It means that you can easily use this type of welding in houses and offices without any worries that its smoke can damage the paint, woodwork or interior of your home or office.

Top 6 Hand Picked Best Cheap TIG Welder On Amazon:

1.

AHP AlphaTIG 200X TIG Welder – Best Choice for Value:

Read Customer Reviews Here >>

The Alpha TIG 200X TIG Welder is perhaps the most economical and best budget TIG welder Australia/UK that can easily do the job for you.

This type of welding is generally considered as an ideal for stainless steel and aluminum, but it can also be used for other type of metals with ease.This can easily do all the jobs for domestic, semi-commercial and commercial purposes with ease.

One of the distinctive features of the Alpha TIG 200X TIG Welder is that it is considered an ideal best low price TIG welder that can easily be used on nearly all ranges of thinner and thicker gauge metals. An area where most of the traditional welding units failed miserably.

One of the best features of this type of TIG welder is that it runs on both 110 or 220 Volts, so it does not matter in which part of the world you live, because this type of welder will definitely work in your area and that’s for sure.

The Alpha 200X Welder can easily handle the thin and precise welds ranges from 1/4 aluminum and 3/8” steel. This welding machine comes with the convenient foot pedal and allows enhanced control to use.

The Alpha 200X TIG welder is one of the lightest and best cheap AC/DC TIG welder that weighs only 69 pounds and it comes with the dimensions of 19 x 23 x 12” (L x W x H).

Technical Specifications of AHP Alpha TIG 200X TIG Welder:

  • Manufacturer: AHP
  • Part Name: Alpha-TIG200x-2018
  • Color: Yellow
  • Weight of Item: 69 Pounds
  • Dimensions: 19 x 23 x 12” (L x W x H)
  • Material: Stainless Steel
  • Batteries Required: No
  • Power Source: AC/DC
Why We Like AHP Alpha TIG 200X TIG Welder
  • IGBT Advanced inverter technology with Pulse Width Modulation
  • Output Frequency is adjustable
  • Extremely low cost operation
  • Exceptional Arc Quality
  • Comes with high quality Torch
  • Features foot pedal for seamless operation
  • Lightweight
  • Setting up the machine is easy

FAQs

Question 1: What is the Duty Cycle of the Alpha TIG Welding machine?

Answer: The Alpha 200X TIG Welder has a 100% unit duty cycle at 150A. It means that if a user operates a machine at 150Amp, then it will get almost 100% unit duty cycle rating with the machine.

Question 2: What kind of Torch it comes with the Alpha TIG Welding machine?

Answer: The Alpha MIG welder comes with the state of the art flex head torch that allows the user to work in extremely low light or dark conditions with ease.

Question 3: Does this TIG welder machine comes with the complete welding leads, regulator and torch leads?

Answer: Yes, it comes with all these accessories plus torch and pedal for enhanced user experience.

Question 4: What is the exact weight of the Best Cheap Tig Welder, as I read someone says that it weighs only 49 lbs, but Amazon says it has 69 lbs weight?

Answer: Yes, you’ve heard correctly on both occasions. The machine actual weight is 69 lbs with attached accessories, and it only weighs 49 lbs with nothing attached to it.

Question 5: What are the gauge and size of the main power cord that comes with the AHP AlphaTIG 200X TIG Welder? Can we use it for 50 Amp?

Answer: The Alpha TIG welder machine comes with the ample size cord of 6 feet, which is sufficient for both domestic and commercial purposes. The machine, although designed to pull 50 Amp, but it isn’t pulling the 50 Amp at all time.

Question 6: What type and size of breaker should be installed with the machine for 110v and 220v?

Answer: Alpha 200X TIG welder draws a little over 20 amps at its full capacity of 200 Amps max. power. So, a 30 Amp 220 breaker can easily do the job for you.

2.

Miller Maxstar 150 STL TIG Welder – Hobbyist Top Choice:

Read Customer Reviews Here >>

If you are looking for compact and best budget TIG welding machine that offers functionality and comes with the economical price, then you don’t have to look elsewhere than the Miller Maxstar 150 STL TIG Welder.

The Miller Maxstar 150 STL TIG Welder is designed to enhance the performance and versatility.

The distinctive feature of Miller Maxstar 150 welding machine is that it is equipped with the DC inverter with lift arc feature.

The Miller TIG Welder is fully loaded with thermal overload protection. The thermal overload protection automatically reduces power consumption and heat, so this machine is cost-effective and highly durable than the other welding machine in its category.

The welding machine can easily be used for all types of steel with ease. The TIG welder machine can easily be used either with 115 Volt or 230 Volt, it means that you can easily use the machine by using the standard electricity available in your region or area.

The best thing about the Maxstar 150 TIG welder machine is its portability. The machine barely weighs 13.7 pounds that allows the users to easily carry the machine from one place to another with ease.

The Best Cheap Tig Welder also comes with dedicated shoulder strap that allows convenience in transporting the machine one place to another. The best budget mig tig welder is the ideal machine to be used in homes, office and workshops.

Technical Specifications of Miller Maxstar 150 STL TIG Welder:

  • Frequency 50/60 Hz
  • Input Voltage: 115 – 230 Volts
  • Duty Cycle: 100A @ 35%
  • Ampere Range: 5 – 150 Amp
  • Weight of the Product: 13.7 lbs
  • Dimensions: 9 x 5.5 x 13.25 Inches (H x W x L)
  • Warranty: 3 Years
Why We Like Miller Maxstar 150 STL TIG Welder
  • Easy to use
  • Stable arc that provides much convenience in usage
  • Extremely lightweight and portable
  • Amperage can be controlled with a remote control
  • Compatible with 115 Volt or 230 Volt with easy switching
  • Comes with the Lift-Arc Technology that allows TIG arc initiation without using high load and frequency

FAQs

Question 1: Does the Maxstar TIG Welding Machine comes with the 120 or 240 plugs?

Answer: Yes, the machine come both the plugs and can easily be switched on either voltages with ease.

Question 2: Does the Miller Maxstar 150 STL TIG Welder comes with the scratch start?

Answer: No, the machine doesn’t come with the scratch start. The term “L” in the STL indicates that it as a lift start switch.

It means when you touch the tungsten of the machine to work, the Maxstar welding machine automatically senses the closed circuit. You can easily control the power with the help of dial or by using the foot pedal (sold additionally).

Question 3: What is the max Amperage of the Best Cheap Tig Welder?

Answer: The machine comes with the maximum amperage age of 5 – 150 Amps with 30% efficiency and 20 – 100 Amp with 35% efficiency.

Question 4: Does the machine come only with the torch or manual gas valve?

Answer: The machine doesn’t come with any type of torch or manual gas valve. It only comes with the gas solenoid that automatically opens or closes with the arc.

Question 5: Can I know the thickness of steel that welding machine is capable to weld?

Answer: If you use the 220 Volt power, then you can easily weld the steel with 3/8”. However 1/2” would be a stretch.

Question 6: Does the machine comes with everything showed in the picture?

Answer: Yes, absolutely, the machine does come with everything that is shown in the picture.

Question 7: Why can’t I use the machine to weld aluminum along with steel parts?

Answer: No, you cannot use the machine with aluminum parts, because the machine id DC only and you need an AC welding machine to weld aluminum. Nevertheless, the machine does a pretty good job on steel and stainless steel.

Question 8: Can I weld the 304-4 stainless steel with the Maxstar TIG welding machine?

Answer: Yes, Absolutely, you can easily use the machine with nearly all types of steel and stainless steel. However, you cannot use the machine for aluminum at all, because it is only a DC machine and not AC.

Question 9: Is this machine is brand new, used or refurbished?

Answer: The machine is 100% pin pack and brand new. It is NOT refurbished, reconditioned or used.

Question 10: Does the welding machine have a warranty?

Answer: Yes, the machine comes with the 3 years of warranty.

3.

Everlast PowerPro 256S TIG Welding Machine – Premium Choice:

Read Customer Reviews Here >>

The Everlast PowerPro 256S TIG Welding Machine is a premium quality AC/DC TIG welder and cutter machine that comes with the “Easy Start” for flawless working.

The TIG welding machine is ultra-lightweight and portable can be used for nearly types of welding with ease.

The Everlast 256G TIG welder machine is powered by the High Pulse Capability that helps to reduce the heat input to produce optimum weld quality.

The Everlast PowerPro TIG Budget welding machine is equipped with the digital display that shows all the real-time reading on the display.

The Everlast TIG welder also comes with the built-in 240 volt receptacle that is designed to use with the revolutionary Everlast PowerCool 300 Water Cooler Machine.

The Everlast 256G TIG welding machine comes with the Arc Force Control that helps to reduce spatter in stick welding and thus improve both the quality and performance of the Arc.

The Best Cheap Tig Welder comes with the amperage range of 250 Amp for TIG welding, 200 Amp for Stick welding and 60 Amp for Plasma Cutter Combo.

The Best Cheap Tig Welder comes with the 12 ft. Economy WP 18 series tig torch that allows easy setup and gas fitting.

The Everlast TIG welding machine offers the enhanced cleaning range that offers better handling than the other types of TIG welding, giving this welding unit an optimum welding performance.

Technical Specifications of the Everlast PowerPro 256S TIG Welding Machine:

  • Input Voltage of the Machine: 240 Volt
  • Amperage Range: 250 Amp TIG, 200 Amp for Stick and 60 Amp for Plasma Cutter
  • Duty Cycle: 60% Efficiency at 250 Amp
  • Total weight of the Machine: 65 lbs
  • Dimensions of the welding machine: 24 x 9 x 17 Inches (H x W x L)
  • Warranty: 5 Years
Why We Like Everlast Welding Machine:
  • Premium quality AC DC TIG Welder machine
  • Consumable Starter kit
  • Comes with the color coded controls
  • 5 Amp start for TIG welding in AC and DC power output
  • Comes with the dedicated NOVA foot pedal

FAQs

Question 1: Can I use the Best Cheap Tig Welder to weld aluminum along with steel?

Answer: Yes, definitely, this machine is an AC DC TIG Welder and you can easily use the machine to weld the aluminum along with the stainless steel or steel parts. You can use either the stick with proper rods or TIG welding for the process.

Question 2: Can you use the DC stick to weld with this beauty?

Answer: Yes, you can easily use the DC stick weld, but it has some limitations. However, the machine is good to go with the 6011, 6013 and 7018 sticks with ease. The machine is not suitable to use the 6010 welding rods.

Question 3: What is the basic difference between 256 and 256s Series?

Answer: The main difference between 256 and 256s is the newer and the older one. The 256s is the older model and released back in 2013. This proper model has a gas gauge mounted on the front side of the machine.

The 220 receptacles on the back side of the water cooler in 256 is always hot, whereas the receptacle of the 256s is only hot when the welder is switched on. It means when you power on the welder, then the cooler of the machine also starts working with it.

Question 4: Is the Everlast PowerPro 256S TIG Welding Machine comes with the water cooler?

Answer: No, the best budget tig welder UK doesn’t come with the water cooler. The cooler of machine is sold separately. This machine is compatible to use with both the air-cooled torch and Everlast Water cooled torch.

Question 5: Does the TIG welder unit comes with all the cables and torches?

Answer: Yes, the Everlast 256s welder unit comes with the all accessories, cables and torches.

Question 6: Does this Best Cheap Tig Welder works perfectly with 7018 and 6010 electrodes?

Answer: The machine is good to go with 7018, but I have not tried the machine with 6010 electrodes.

Question 7: What is the Duty Cycle of the Everlast PowerPro 256S TIG Welding Machine?

Answer: The TIG welder comes with:

4.

Amico TIG 225 Inverter TIG Welder – Best Budget TIG Welder:

Read Customer Reviews Here >>

If you are tight on budget and looking to purchase the TIG welder below the price tag of $300, then you’ve come at the right place for the right thing. The name of the ideal product you are looking for is Amico TIG 225 Inverter TIG Welder.

The Amico TIG welder machine is a multifunction 2 in 1 welding machine that can be used for both TIG welding and stick welding

The Amico 225 TIG welder is an ideal welding machine for high frequency for Stick/Arc welder and TIG torch. The high frequency helps to improve the life of the tungsten and guarantee a 100 start-up.

The Best Cheap Tig Welder is equipped with the automatic compensation for voltage function that provides over-voltage protection, under-voltage protection and over-load protection.

The 225 TIG welder works with both the 115 Volt and 230 Volt outlets. The machine is equipped with the revolutionary and durable IGBT inverter technology that provides exceptional stability and control over Arc.

The Best Cheap Tig Welder is ultra-lightweight and portable and weighs only 16 lbs in total. It means all the users can easily carry the welding machine to almost anywhere else with ease.

The machine also comes with automatic temperature and fan dormancy control modules.

The machine comes with the dedicated torch gun designed for cheap TIG welding, ground clamp, electrode holder, cord adapter, gas hose, holder and work cable.

Technical Specifications of the Amico 225 TIG Welder Machine:

  • Total amperage range of the machine: 20 Amp – 200 Amp
  • Working Voltage: 115/230 Volt
  • Duty Cycle: 60% Efficiency @ 220 Amp
  • Total weight of the Machine: 27 lbs
  • Dimensions of the Machine: 16 x 6.5 x 12 Inches (H x W x L)
  • Warranty: 1 Year
Why We Like Cheap Amico TIG Welder Machine:
  • 100% compatible with both the TIG welding and Stick welding
  • Comes with Automatic Compensation for Voltage
  • Comes with Automatic Temperature Control
  • Powered by IGBT Inverter Technology
  • Equipped with the Bright display on Front side of the machine
  • Comes with Fan Dormancy control

FAQs

Question 1: What type and model of torch the machine comes with?

Answer: The machine comes with the 26 way torch that is more than enough.

Question 2: What type of cooler this Amico TIG 225 Inverter TIG Welder? Is it water cooler or air cooled?

Answer: The Amico 225 Welder machine is air an cooled torch. The machine is cooled by the flow of air running in and out from the machine. Please note that the air cooled technology is not more efficient than the water-cooled technology, but still good to go with this type of welder.

Question 3: What is the duty cycle of the welder machine on 110V? Is the stick lift/scratch start?

Answer: The duty cycle of the machine is 60 and yes, you scratch to stick weld.

Question 4: What is the length of the 220 cord that comes with the welder?

Answer: The Best Cheap Tig Welder comes with the 12’ cord length and I think it’s sufficient for outdoor operations.

Question 5: Does the Amico 225 TIG Welder machine comes with the Pulse Control?

Answer: Now, the machine doesn’t come with the pulse control.

Question 6: Where would I have to send the machine back? I am located in Turkey?

Answer: The machine comes with the 1 year warranty. If you experience any malfunctioning in the machine, then you just have to send the machine back to our manufacturing facility located in Los Angeles, USA.

5.

Primeweld TIG225X TIG Welder – Best Welder At Best Price:

Read Customer Reviews Here >>

If you are looking to buy the AC DC TIG welder that you can use to weld aluminum, stainless steel, steel and thinner metals, then the best TIG welder than can fulfill your purpose in an efficient manner is a Primeweld TIG225X TIG Welder.

The Primeweld TIG welder is equipped with the HF start power with Pulse Width Modulation that deliver the 10/90 pulse ratio from 10 – 225 Amp, that’s really amazing for a TIG welder in this price range.

As far as the Duty Cycle of the machine is concerned; the Best Cheap Tig Welder comes with 100% Efficiency at 108 Amps. This power is enough to weld 1/8 inch of metal. The Best Cheap Tig Welder offers 40% power duty cycle at full rated power.

The welding heat of the machine can easily be controlled with the help of dedicated foot control pedal control and HF start hand torch.

The Primeweld 225X TIG Welder comes with the dual voltage input of 120/240 voltage and that offers more versatility than the other TIG welder machine available in this price range.

The Primeweld is fully back with the 3 year warranty and comes with the metal foot control, CK Dinse Connector and CK17 torch with flex lines. All the users can easily upgrade to the water-cooling kit by using the CK20 equipment.


Technical Specifications of the Primeweld TIG 225 Welder Machine:

  • Duty Cycle: 40% @ 225 Amp
  • Input Voltage: 110/220 Volt
  • Amperage Range: 10 – 225 Amp
  • Total Weight of Machine: 90 lbs
  • Dimensions of Machine: 24 x 19 x 12 Inches
  • Warranty: 3 years
Why We Like Primeweld 225 Welding Machine:
  • Comes with the IBGT Inverter Technology Pulse Width Modulation
  • HF Arc starting
  • Comes with the regulator and foot pedal
  • 200 Hz Pulse Frequency
  • Comes with the revolutionary and renowned CK17 US-made torch

FAQs

Question 1: What is the Duty Cycle rating of the Primeweld TIG225X TIG Welder?

Answer: The machine comes with the 10 – 225 Amp, AC/DC/ w/Pulse, 120/240 volt.

Duty cycle 120 Volt:

TIG 40% @ 140, 100% @ 108

MMA 40% @ 120, 100% @ 76

Duty cycle 240 Volt:

TIG 40% @ 225, 100% @ 155

MMA 40% @ 180, 100% @ 139

Question 2: Can we upgrade the Best Cheap Tig Welder with the water cooled torch?

Answer: The TIG welding machine comes with the world-renowned CK17 Torch with flex lines. Yes, you can easily upgrade the torch with water cooled by replacing the torch with the CK20 torch.

Question 3: What is the size of the foot pedal that comes with the welder as accessory:

Answer: The TIG welder comes with the 7 pin foot pedal, which is considered as a standard with most of the TIG welders used worldwide.

Question 4: Can we use the Stick Weld on AC with the machine?

Answer: Yes, the machine will work the stick weld on AC.

Question 5: Can we use the TIG welder machine with the 6010 electrodes?

Answer: Yes, the machine is designed to go with any type weld regardless the size of the material.

Question 6: Can we use this machine to weld aluminum?

Answer: Yes, you can easily use the machine to weld aluminum and it can easily weld the thinner metals.

Question 7: What is the minimum Ampere on which this machine can run?

Answer: The TIG welder machine requires at least 50 Amp for 220.

Question 8: Tell me about the fans that comes with the machine:

Answer: The machine comes with the 2 always ON 2 x 150 mm fans, which are mounted on the rear side of the machine. We have measured the Decibel at 1 meter or 3 feet as 68 DB from the front side of the welder.


6.

SUNGOLDPOWER 200Amp TIG Welder – Best Value for Money:

Read Customer Reviews Here >>

If you are looking to purchase a value TIG welder that offers you versatility and performance, then SUNGOLDPOWER 200Amp TIG Welder is the ideal best budget TIG welder that you are looking for.

The SUNGOLDPOWER TIG welder can be used to weld different metals such as stainless steel, steel, nickel alloys, bronze, copper alloy and so on.

The TIG Welder comes with the HF start that helps to improve the life of tungsten. The TIG welder is fully protected by the overload protection, under voltage protection and over voltage protection.

The Best Cheap Tig Welder also comes with the Automatic compensation for voltage fluctuation and can easily adjust itself against minor or major voltage fluctuations.

The SUNGOLDPOWER2 200 TIG Welder comes with the built-in fan cooling system, it means that fans can easily prevent the overheating the machine during excessive usage.

The Best Cheap Tig Welder works with both the 110 and 220 Volt power source. Furthermore, this is the few handpicked TIG welder that can easily handle both the MMA and TIG welding with precision.

The SUNPOWERGOLD TIG welding machine is equipped with the digital LED display that shows the real time readings on the screen. The machine is very lightweight and the overall weight of the machine is just 22 lbs.


Technical Specifications of the SUNPOWERGOLD TIG Welder:

  • Amperage Range: 65 – 200 Amp
  • Input Voltage: 110 – 220 Volt
  • Duty Cycle: 60% @ 200 Amp
  • Total weight of the machine: 22 lbs
  • Dimensions of the Machine: 13.7 x 5.5 x 10.4 Inches (H x W x L)
  • Warranty: 1 Year
Why We Like Cheap Budget TIG Welding Machine:
  • Can be used on a variety of metals, except aluminum
  • Performs high-frequency welding with easy
  • Comes with the built-in Fan cooling system to prevent overheating
  • Lightweight
  • Supports both TIG and MMA Welding

FAQs

Question 1: Does the Best Cheap Tig Welder is Lift Start?

Answer: No, the machine is not lift start. It’s high frequency. Thanks for asking.

Question 2: Does we need to use a welding shield gas with TIG operation?

Answer: Yes, the machine needs the welding shield gas with Argon for working.

Question 3: What type of power plug comes with the Best Cheap Tig Welder?

Answer: The machine comes with the one plug and it’s 100% compatible to use with both the 110 or 220 Volts.

Question 4: Can I use the SUNGOLDPOWER 200Amp TIG Welder to weld the thin metals like automobile body?

Answer: Yes, Absolutely, the machine is designed to weld a variety of thinner metals, including the automobile body.

The machine has an amperage range of 20 – 100 Amps. In order to weld the thin metal, you should set a lower Amp setting to weld thinner metals as low as 18 gauge metal.

Question 5: What is the warranty of the cheap Tig Welder UK?

Answer: Dear, the welding machine comes with the one year warranty, which includes three months for changing and refunding and one year for repairing. Thanks for your interest in the product.

Our Top Choice For Best Cheap Tig Welder:

From the list of 6 different TIG welders, we handpicked the AHP AlphaTIG 200X TIG Welder as the best TIG welder, because of its immaculate and distinctive features that the other welders. 

The reason we have selected the AlphaTIG 200X TIG welder is because of its exceptional and out of the box features, as ease of control, ultra portability, foot pedal, on-board fan, flow regulator and foot pedal.

One of the best features of the ALPHA TIG welder that it is the ideal TIG welder that can easily use of steel, stainless steel, aluminum and thinner metals. It can also be used on thick materials as well. The machine can easily weld both the 7018 and 6013 with precision.

Another best feature of this product is its portability. The Best Cheap Tig Welder only weighs 39 pounds, so all the customers can easily carry it from one place to another without any problems at all. Furthermore, this TIG welder in the UK also give best value for your money.

How to Pick the Best Cheap Tig Welder?

Like any other machine, the TIG welder also consists of several factors, which needs to be taken into context before finalizing your decision.  

1.  AC/DC:

This is the most important factor in selecting the best inexpensive budget TIG welder for your purpose. It is very important to first determine the purpose you want to fulfill. 

Usually the best budget AC TIG welder is used to weld aluminum and other light weight metals. Whereas, the best inexpensive DC TIG is usually designed to weld steel, stainless steel of thicker metals. You should not use AC TIG welder for thick metal and vice versa.

2.  Amperage Range:

This is by far most the most important factor in selecting the best TIG welder for your purpose. You should only go for amperage range that can help you in different applications with ease. All the TIG welder with a high pulse rate produces a stronger weld and gives you more control.

The smaller range is designed for light workload, whereas the higher amperage range is designed for a heavy workload.

Usually, the best range for any TIG welder is 200 amps. This range allows you to easily weld the 20 gauge steel and 1/4 inch thick aluminum.

3.  Pulse Rate: 

It is another important factor in selecting the Best Cheap Tig Welder. Usually, the older TIG machine produces 4000 – 4500 pulse rate per second, while the newer machine can easily produce the 5000 pulse rate per second.

The higher the pulse rate, the better the performance will be. The pulse rate helps to reduce the overall heat on the metal and prevents it from breaking.

4.  Air Cooled or Water Cooled:

Best quality and budget TIG welder in UK, Australia also comes with either the water-cooled or air-cooled feature. The main purpose of cooling is to cool down the lower temperature of the machine during heavy work load.

The air-cooled TIG welders usually use the temperature of the surrounding air, while the water-cooled welder uses the internal water-cooling kit to lower down the extreme temperature of TIG welders.

5.  Foot Pedal: 

The addition of foot pedals to the Best Cheap TIG welder helps to streamline the whole welding process, because you can need both your hands to control the weld, so the use of foot pedal allows you to control the welder without lifting your hands from the metal.

Just keep in mind that usually the best foot pedals have the natural and ergonomic angle that doesn’t cause any discomfort in your foot, because you have to use the welder for longer duration, so you must select the pedal that goes well with you.

May 3, 2023

May 3, 2023

May 3, 2023

May 3, 2023

February 12, 2023

February 12, 2023

February 12, 2023

February 12, 2023

Leave a Comment